Operating Test; Backrest Pad - eurodent ABSOLUTE Guia De Instalacion

B4
B5
B6

OPERATING TEST

Now, proceed to fit the tie rod operating the Trendelenburg
movement.
By using a 13-mm spanner remove the nut, then insert
the tie rod eye and lock the rod again by the proper nut.
Supply voltage to the chair and perform some trial
movements in order to ascertain that the stop
microswitches work properly.
Finally, mount upholstery.

BACKREST PAD

Position upholstery higher than backrest. Then, slide it
downwards, in order to secure it properly and firmly to the
three fastening screws, as shown in figure.
Fasten upholstery by the T-clamp, and press it against
the two upholstery tags, as shown in figure.
Relocate the armrest.
29
ABSOLUTE
Installation instructions