Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Trimming your eyebrows
(Use the eyeblow blade)
■ Basic eyebrow shape (Fig. 7)
1 The eyebrow base (F
lines extending from the inner side
and outer side of the nose.
2 The eyebrow crest (F
eyebrow arch (F
extending from the outer edge of
the eye and the iris.
3 The eyebrow tip (F
line extending from and connecting
the outer side of the nose and the
outer edge of the eye.
■ Using the facial trimmer on
the eyebrows (Fig. 8)
Slowly move the facial trimmer in the
direction of the arrow along the hair
sticking out of the outline.
1. Above the eyebrow
Stop at about 2-3 mm on the side
of the eyebrow.
2. Below the eyebrow
Trim while holding the eyelid and
stretching the skin.
3. The brow
Trim while changing your grip.
Eyebrow comb
1. Eyebrow comb A
Trimming length: 6~8 mm
Finished image:
Overall long eyebrow (even length)
For a natural eyebrow
2. Eyebrow comb B
Trimming length: 2~4 mm
Finished image:
Overall short eyebrow (even length)
Eyebrow becomes easier to draw.
) is within the
A
) is above the
C
) within the lines
B
) is within the
D
(Fig. 9)
■ Attaching the comb (Fig. 10)
• Support the head of the trimmer
with your finger so that it does not
swing excessively.
• Select the trimming length and
align the L (long) or S (short) mark
with the groove in the eyebrow
comb. Insert the eyebrow comb to
the eyebrow blade until it clicks in.
■ How to use (Fig. 11)
• Use the eyebrow comb by holding it
close to your skin (F
The blade is at the position of the
line (F
).
B
1. Align the comb with your eyebrow
and move from the end to the
beginning of the eyebrow. (Fig. 12)
2. Repeat until the eyebrow is
trimmed to a desired length.
• Depending on individuals, the hair
at the eyebrow base may be
pointing upward. In this case, it is
recommended the comb be moved
against the flow of the hair, in the
direction from the forehead to the
nose. (Fig. 13)
Cleaning
(Be sure to turn off the switch)
1. Remove the blade.
2. Clean with brush.
3. Wipe off any trimmed hair with a
dry cloth.
4. After cleaning, attach the blade to
its original position.
6
).
A
Tabla de contenido
