Idiomas disponibles
Idiomas disponibles
BKP-200TL_6
10/14/05
4:35 PM
10 Motor Back Massager
Targeted
Massage Buttons
Zone buttons activate motors
to massage specific areas:
upper back, middle back,
lower back and seat.
Customize your massage by
choosing one specific area,
any combination of areas, or
all four at once. To select a
massage area, simply slide
the button to the right and
the corresponding L.E.D.
light will illuminate. To
deselect, simply slide the
button to the far left and the
corresponding L.E.D. lights
will turn off.
Power Adaptors
This massager is powered by
a custom 120 volt AC home
adaptor, and 12 volt DC auto
adaptor (cigarette lighter
plug-in style). Both are
included with your unit.
NOTE:
When selecting
the heat feature with
massaging action, there
will be a slight decrease in
the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
Page 7
6
10 Massage
On/Off
Motors
Before connecting power
source, be sure the controls
are in the far left position.
Select L or H to activate the
cushion and select a zone
to begin the massage
Soothing
function. To choose the
Heat
intensity of your massage,
adjust the strength from L
to H. Slide the power switch
to customize the intensity.
To turn the power off, slide
the switch to the far left
position and the LED will
turn off.
Heat
Soothing, penetrating heat is
activated by pressing this
button. To turn off heat,
simply press the button
again. The glowing L.E.D.
light indicates that heat is on.
PLEASE NOTE:
The heat
option will only work while
a massage feature is
selected.
Pressure
Activated
Switch
7
