Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPTIONAL
EQUIPMENT
CONNECTIONS
Optional
Equipment
Connections
(cont.)
DVl (Digital
Visual
Interface)
input connection
Note:
DW is not available
in model
CT-27HL14.
The DVl/HDCP 1 input on your TV can accommodate
copy
protected
digital
programming.
The
DVl/HDCP
input
terminal complies with the ETA-861Profiles 2 standard and is
not intended for use with personal computers.
The DVl/
HDCP
input
can
be connected
to an EtA/CEA
861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVl output connection 3.
The DVl/HDCP input is designed for best performance with
HDTV signals, such as 1080i. The DVl/HDCP
input will
also accept and display 480i and 480p picture signals.
Notes:
1.
DVl/HDCP
= Digital
Visual
interface
/ High-Bandwidth
Digital
Copy
Protection.
2.
EIA/CEA-861
Profiles
compliance
covers
profiles
for
transmission
of uncompressed
digital
video
including
high bandwidth
digital content
protection.
3.
Consult
your
consumer
electronics
dealer
for availability
details.
Follow
the
diagram
below
to connect
the
TV to a set
top
box
or a DVD
player.
Note:
Rear A/V jacks
diagram
may
vary, depending
on model.
Please
refer to the FEATURE
CHART
on page
3 for your
model
capabilities.
Procedure
Press
TV/VIDEO
button
and the numeric
keys
on the
remote
control
to select
DIGITAL-IN
input.
Connect
the DVI output
from
the set top box or a DVD
player
to the DVI input on the back of the TV.
Connect
the Audio
Out signal
from
the set top box
or
DVD
player
to the Audio
In input associated
with
the
DIGITAL
INPUT.
Note:
This HD TV Monitor
is not intended
to be used with a PC.
Program
Out Connection
(PROG OUT)
To use the television
audio
and video
with
optional
equipment,
connect
the PROG
OUT and TO AUDIO
AMP connections
on the
back of the television.
Note:
If the Main Picture
signal
is Component
Video Input,
no
Program
out signal
will be available.
TERMINALS
ON BACK
OF TELEVISION
Dllr_p_
'
0
O
@
@
........
i
oooB ...........
--
©©©
I;i;
o o o
CABLES
NOT SUPPLIED
Monitor
VCR
Note:
Rear A/V jacks
diagram
may
vary, depending
on model.
Please
refer to the FEATURE
CHART
on page
3 for your
model
capabilities.
Procedure
Connect
optional
equipment
to PROG
OUT
and
TO
AUDIO
AMP terminals.
PROG
OUT
terminal
display
is the same
as on-screen
display.
See
optional
equipment
manual
for further
instructions
for recording
and monitoring.
Special
Remote
Button
SAP Button
Press this button to let you cycle through different audio
modes.
If you are receiving a stereo program
and you
press the SAP button, you can cycle between STEREO
and MONO.
TVNIDEO
Button
Direct Video Input Selection
This feature lets you select video inputs directly using the
TV/VtDEO
button and the numeric keys on the remote
control.
Procedure
•
Press TV/VIDEO button on the remote control
to display the Input selection menu.
For model CT-27HL14
For model CT-32HC14
Note:
•
Press
corresponding
number
key
on
the
remote
control
to select
the
input
of your
choice.
Video input can also be selected by pressing
the TV/
WDEO, then the CH AVbuttons.
8o
Capítulos
Tabla de contenido
