Moving The Wet/Dry Vac; Blowing Feature - RIDGID WD16400 Manual Del Proprietário

Operation (continued)

Moving the Wet/Dry Vac

Should it become necessary to pick the
Vac up to move it, the Handles on the
sides of the Dust Drum are used to lift.
To maneuver the Vac, the Pull Handle,
above the Vacuum Inlet Port should be
used.
Pull Handle
Vacuum
Dust Inlet Port
Drum
Handle

Blowing Feature

Your Wet/Dry Vac features "Full Blowing".
It can blow sawdust and other debris.
Follow the steps below to use your Vac
as a Blower.
1. Locate Blowing Port of your Wet/Dry
Vac.
2. Insert the Push Button End of the
Tug-A-Long Positive Locking Hose
with Dual-Flex into the Blowing Port
of the Vac.
3. (Optional) Attach Extension Wand to
Swivel End of Hose, then place the
Utility Nozzle on the Wand.
4. Turn Vac on and you are ready to use
your Vac as a Blower.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
Tug-A-Long Positive Locking
Hose with Dual-Flex
Dual-Flex
Locking
Hose
Utility
Nozzle
(optional)
9
Blowing
Port
Swivel
End of
Hose
Extension
Wand
(optional)