Precaution, Restriction And Warning; Transport Condition, Warehousing And Operation; Sensitivity To Predictable Environmental Conditions In Ordinary Situations Of Use; Recommendations For The Equipment's Conservation - GNATUS Optilight Color Manual Del Proprietário

PRECAUTION, RESTRICTION AND WARNING

Transport conditions, warehousing and operation
The equipment must be transported and stored with the following observations:
- Carefully, to not suffer falls and neither receive impacts.
- Protected from moist, do not expose to rain, water splashes or moist floor.
- Keep in a protected place from the rain and direct sun and its original package.
- When transporting, do not move it in irregular surfaces and protect the package from
the direct rain and respect the maximum piling informed at the external part of the package.
- Room temperature range for transport or warehousing -12ºC to +50ºC.
- Room temperature range recommended by Gnatus +10ºC to +35ºC.
ATTENTION: The equipment must be only used with the power cable supplied by
Gnatus, otherwise, it can cause the increasing of the emission or reducing of the equipment's
immunity.
The equipment keeps its safety condition and efficiency, since kept (stored) as
mentioned in this operation instruction. That way, the equipment will not lose or
change its physical and dimensional characteristics.
Sensitivity to predictable environmental conditions in ordinary
situations of use
- The equipment has been designed not to be sensible to interferences as magnetic
fields, external electrical influences, electrostatic discharges, the pressure or the variation
of pressure, since the equipment is installed and kept clean, conserved, transported and
operated conforming this operation instruction.

Recommendations for the equipment's conservation

Your Gnatus equipment has been designed and improved following modern technology
standards. All devices need special care, which a lot of times are forgotten for several reasons
and circumstances, because of that, here are some important reminders for your everyday.
Seek to observe these little rules that incorporated to the job's routine, will provide a big
time economy and will avoid unnecessary expenses.

Precautions and warnings "during installation" of the equipment

- Check the voltage of the equipment when performing the electrical installation.
- Place the equipment at a place that will not get wet.
- Install the equipment at a place where it will be not damaged by pressure, temperature,
direct solar light, powder and salt.
- The equipment shall not be submitted to bending, excessive vibrations or shocks (including
while transporting and handling).
- This equipment was not designed for the use at an environment where fumes, inflammable
anesthetic mixtures with the air or oxygen and nitrous oxide can be detected.
- Before the first use and/or after long work interruptions such as vacations, clean and
disinfect the equipment.
- This equipment is not sensible to electrical interference; electrostatics and pressure, since
cleaning items, maintenance, transport and operation of this manual are observed. However,
an electromagnetic environment can interfere in its normal operation.
40