GNATUS Optilight Color Manual Del Proprietário página 39

EQUIPMENT OPERATION
Automatic shutdown:
The equipment will turn off automatically when not in use for more than 3 minutes. For
turning it on again, press the On / Off button.
IMPORTANT:
- Never address the light beam to the eyes;
- The ocular protector has the goal of filtrate only the blue light that operates in the photo
polymerization of resins for protecting the sight and still allows that the room light has a
path to the operative field.
- After using it, keep the light conductor protected by the protection cover.
Application types: Continuous, Ramp and Pulse
* Tolerance of ± 200 mW/cm²
• Continuous:
Maximum and continuous mode of light
intensity (same luminosity from the
beginning to the end of polymerization).
• Maximum power = 1200 mW/cm²*
• Ramp:
Gradual mode, the light intensity
increases gradually.
• Gradual increasing = 500 - 1200 mW/cm²*
• Pulse:
Pulse modes are cycles that oscillate at a
fixed frequency.
• On/Off at each 1sec. maximum power =
1200 mW/cm²*
39