Ki Mobility Catalyst 5 Manual De Instrucciones Y Garantía página 35

V. SET UP & USE OF YOUR WHEELCHAIR
S. Catalyst 5, 5Ti & Spark
3. Adjusting the Wheel Base Width (Fig. 32)
The sleeve that holds the axle is adjustable in and out. Adjusting
this sleeve allows the user to move the wheels closer or further
away from the axle plate which increases or decreases the overall
width. Increasing the overall width will improve side to side
stability, but may make it harder to fit through doors. Decreasing
the overall width may improve accessibility. When decreasing the
overall width, make sure you do not create a condition where the
wheels rub on armrests or other parts of the chair.
a. Loosen the nuts and turn the axle sleeve in or out as
desired (Fig. 32:A). Count the number of threads showing
and repeat on the opposite side.
b. Retighten nuts.
4. Rear Seat Height Adjustment
The rear seat height can be adjusted by moving the axle plate
vertically in the predrilled frame holes. This adjustment allows a 4" vertical seat height adjustment.
NOTE: A front caster adjustment should be made to correspond with any change in seat
height. See Section Z. Caster Forks.
Fig. 32
33