In Case Of Difficulty - Honeywell REM5000R1001 Manual Del Usuario

In case of difficulty

Slow response The thermostat may take up to 15 seconds to respond to commands
entered at the remote control.
Heating or • Check circuit breaker and reset if necessary.
cooling system
• Make sure power switch at heating & cooling system is on.
does not respond
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
Screen displays Remote control has lost radio contact with the wireless network (usually
"No Signal" because of a power outage). To restore power:
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
After power is restored, the remote control will automatically restore wireless
communication within a few minutes.
13
Wireless Remote Control