Add A Controller - Hach MSM 1.5 Manual Básico Del Usuario

6. Select the role of the new user.
Option
Administrator
Basic
Note: A user can have both Administrator and Basic roles.
7. Push SAVE.
The list shows the new user.
An invitation email is sent to the new user to activate the account. Refer to
on page 15.

Add a controller

1. Install the mA output cards, relay cards and profibus cards in the controller. Refer to the controller
user manual for installation instructions.
2. Connect the sensors to the controller. Refer to the SC1500 and/or SC4200c controller user
manual for installation instructions.
3. Supply power to the controller.
4. Connect the controller to the HACH Server. Refer to
5. To start the MSM application, open the browser on a Mobile device/PC and log in the account.
6. Push Devices.
7. Push ADD CONTROLLER to add the controller.
8. Enter the serial number of the controller. Push Continue to confirm.
9. Wait 30 seconds, then refresh the browser. The controller will be Online on the device list. Refer
to User interface and navigation—Mobile device/PC
10. Make sure that the correct serial number and image of the controller are shown.
11. Select the controller on the device list to open the controller details page.
The sensors and cards connected to the controller are shown. Refer to
16 English
Description
• Manages administrators and users.
• Manages hardware.
• Updates software.
• Manages and maintains devices.
• Manages and maintains devices.
Activate the account
Connect a controller to a network
on page 13.
Figure
on page 6.
6.