Worx WA3724 Manual Del Usuario página 7

5. Always keep the battery connect with
the charger and the charger is powered
on. After the battery is fully charged, the
green light will turn on and the charger
will automatically switch off. If the battery
capacity drops below 90%, the charger will
start charging again, and the light will turn
red.
NOTE: If the battery is defective, the red
light will flash.
The lights will only function when the
charger is connected to both the battery
and wall receptacle.
MAINTAIN TOOLS WITH
CARE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication
or maintenance. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
Battery charger
7
EN