GRE LLEDP56C Manual De Instalación Y Mantenimiento página 3

• SPEED: selects one of the 8 speeds available.
• ON/OFF: switches the lamp/s or spotlight/s ON and OFF.
DO NOT PLACE HAND OVER TOP OF THE BUTTONS ON CONTROL MOTION
7. OPERATION:
Control Motion is able to control lamp/s through the buttons or movement.
In order for a lamp to respond to Control Motion, it must be placed near the
lamp/s. If you have more than one lamp, place it in the middle of them to ensure
optimum reception.
7.1 Remote control
- Switching spotlights on
By pressing the ON/OFF button for a few seconds, the spotlights will turn on.
- Selecting colours
The COLOR button enables you to select one of the 12 available colours. Each time the button is pressed, the colour
changes; when the last colour is reached, pressing again goes back to the first colour. The colour selected is displayed
in the Central Display.
COLOUR Nº COLOUR
1
2
3
4
5
6 Magenta
- Selecting sequences
The SEQUENCE button enables you to select one of the 8 available sequences. Each time the button is pressed, the
sequence changes; when the last sequence is reached, pressing again goes back to the first sequence. All sequences
work in cycles; when the last sequence is reached the cycle starts again.
The numbers of the sequences appear on the display numbered from 1 to 8.
SEQUENCE
Estival Red Green
Caroline
Cyan Magenta
Iris Green Esmerald green
Candy Red Orange
Tropical
Red
Paradise Red Orange
Abril
Pale violet Magenta
Eleven
Red Green
- Refresh button
In pools with more than one lamp, this button is used to synchronise them.
If one of the lamps fails to respond to the COLOR/SEQUENCE commands, press the REFRESH button on the lamp and
the last command will be sent so that it synchronises with the others.
- Selecting the speed of sequences
The -/+ buttons enable you to select one of the eight sequences, ordered from the slowest to the fastest speed.
- Switching spotlights off
The spotlights are turned off by pressing the ON/OFF button. The status (colour/sequence) of the lamps is stored in the
memory for the next time the system is switched on.
- Switching the remote control off
The remote control automatically switches off in less than 60 seconds.
The LED display lights on the remote control only light up for a few seconds.
7.2 Control motion mode (see page 22)
When the control motion mode is switched on, the colours and sequences can be changed.
ATTENTION
Red
Green
Blue
Yellow
Cyan
Blue
Yellow
Cyan Sky-blue
Green Orange
Pink Blue Pink
Green Cyan
Cyan Yellow
Blue Yellow
COLOUR Nº
7
8
9
10
11 Emerald green
12
ORDER OF COLOURS
Blue Pink
White Yellow Cyan
Cyan Magenta Pale
violet
3
REFRESH
Central Display
COLOR
SEQUENCE
SPEED -/+
ON/OFF
COLOUR
Sky-blue
Pale violet
Orange
Pink
White
Magenta
Sky-blue Orange Pink Esmerald White
green