miniland baby digimonitor 3.5 plus Manual Del Usuario página 22

5.2.8.4. CAMERA VOLUME
This menu will allow you to configure the volume level at which the parents' voices
will be reproduced on the camera by using the two-way function and the volume at
which the lullabies will be heard.
To configure the camera volume, use the buttons
volume icon (i)
and ▼ again, choose whichever of the three camera volume levels available
(HIGH/MID/LOW) you prefer. Press the remote/accept button (10) again to confirm the
selection.
Bear in mind that the volume will only be configured for the camera whose image you are
viewing on the monitor at that time.
5.2.8.5. TRANSMISSION LEVEL
On this menu you can change the power level transmitted by the camera, choosing from
amongst the high/low options. When at the high position (HI), coverage will extend 300
metres in open country with the original power. When at the low position (LOW), the
maximum transmission distance is reduced to around 150 metres in open country as the
transmitting power is reduced.
To configure the transmission level, use the buttons
transmission level icon (j)
buttons ▲ and ▼ again, choose whichever of the two camera transmission levels available
(HIGH/LOW) you prefer. Press the remote/accept button (10) again to confirm the
selection.
5.2.8.6. ACCOMPANYING LIGHT
To activate the accompanying light, use the buttons
accompanying light icon
the buttons ▲ and
Press the remote/accept button (10) again to confirm the selection.
Bear in mind that the accompanying light will only be configured for the camera whose
image you are viewing on the monitor at that time.
5.2.8.7. VIBRATION FUNCTION
This function allows parents to achieve a silent environment when they need peace and
quiet and it is a great help in noisy environments and for people who have hearing
problems.
When the sound in the baby's room exceeds the threshold marked by the sensitivity level
configured, the monitor will vibrate on eight occasions to warn the parents.
To activate the vibration function, use the buttons
icon (hl) and press the remote/accept button (10) to confirm. Using the buttons
▼ again, choose whichever of the options (ON) or (OFF) you prefer. Press the
remote/accept button (10) again to confirm the selection.
Bear in mind that the vibration function will only be configured for the camera whose image
you are viewing on the monitor at that time.
and press the remote/accept button (10) to confirm. Using the buttons
and press the remote/accept button (10) to confirm. Using the
(k) and press the remote/accept button (10) to confirm. Using
▼ again, choose whichever of the options (ON) or (OFF) you prefer.
▲ ▼
(7) and (9) to select the camera
▲ ▼
(7) and (9) to select the
▲ (7) and ▼ (9) to choose the
▲ ▼
(7) and (9) to select the vibration
en
▲
▲ and