RS Pro RS3000 Serie Manual De Instrucciones página 6

Condition Indicators
OCP
•
c.c
•
c.v
•
e LOCK
Voltage and Current Adjustment Knob Operation
There are 2 adjustment modes for the voltage and current levels, that is, Mode 1
and Mode 2. Mode 1: Before setting, push the knobs to adjust the voltage and
current levels. Mode 2: adjust directly, no need to push the knobs. And these 2
modes can be shifted by pushing the voltage adjustment knob and the current
adjustment knob at the same time and holding for
VOLTAGE
PUSH
FINEJCOAR8E
CURRENT
To
:
,./Hold
\ OCPONIOFF
PUSH
FINE/COARSE
RS3000/6000-Series User Manual
-
Over Current Protection indicator. When the power supply
is in OCP mode, this light is on.
C.C indicates constant current. When the power supply is
in constant current mode, this light is on.
C.V indicates constant voltage. When the power supply is
in constant voltage mode, this light is on.
Panel LOCK Irdicator
Mode1 LOCD Adjustment Mode
Voltage Adjustment Knob: Push the voltage
adjustmert knob and the voltage meter will flicker.
V
oltage output car be changed by adjustirg the
T
knob. he resolution of the knob rotatior can be
changed. Push it to change the resolution of voltage
adjustment.
Currert Adjustment Knob: Push the current
adjustment knob ard the voltage meter will flicker.
Cu
rrert output can be charged by adjustirg the
P
knob. ush the knob agair when the meter
and
flikers the resolution of the knob rotation car
be changed.
6
LED Panel Lights
2 seconds.