Klarstein 10029385 Manual Del Usuario página 25

ON/OFF key
• In STANDBY MODE press the ON/OFF key, the windows will open, when finish opening display & all button
light on hood in WORKING MODE. If the first motor start working in LOW speed & light off automatically; or
recover from the same setting of last working operation (Same for Remote control).
• In WORKING MODE, press ON/OFF key , motor stop working, but light will not change statue
• In WORKING MODE, press ON/OFF key & hold for 3 seconds, Motor & light stop working , close window &
back to STANDBY MODE ( Same Remote control with short press).
FAN SPEED key
• Button for changing the speed of motor following cycle „Low-Middle-High". This key could not stop motor
working.
• Same for the key in Remote control
LIGHT button
• Short press for lamp power control.
Clock setting:
• In STANDBY MODE, press ON/OFF key + FAN SPEED key & hold for 1 second, the „88:88" flashing & enter
the CLOCK SETTING MODE.
• Press ON/OFF key for changing selecting hour or minute.
• Press FAN SPEED key for decrease.
• Press LIGHT button for increase.
• If press ON/OFF key + LIGHT button or without no any operation in CLOCK SETTING MODE for 5 seconds,
will save automatically & exit CLOCK SETTING MODE.
Timer setting:
• When motor is working, press ON/OFF key + FAN SPEED key & hold for 1 second, the „00:00" flashing &
enter the TIMER SETTING MODE.
• Press ON/OFF key for increase 15 minutes.
• Press FAN SPEED key for decrease 1 minute.
• Press LIGHT button for increase 1 minute.
• If press ON/OFF key + FAN SPEED key or without no operation in TIMER SETTING MODE for 10 seconds,
will save automatically start to count down, display shows the left time. When time up, both motor & light
will turn off automatically & come back to STANDBY MODE (but the windows will not closed).
Display: Same as the TOUCH CONTROL 2.
25