Important Safety Instructions
Statement of Intended Use
Tripp Lite Medical-Grade UPS Systems are intended to support and protect non-medical computer
equipment and medical devices that require leakage current reduction, surge protection, voltage
regulation, line noise filtering and battery backup during power outages and generator testing, both
inside and outside patient care areas. Tripp Lite's Medical-Grade UPS Systems come with hospital-
grade plugs and receptacles that reduce leakage to below 100μA.
Product Information
AC Input Voltage
Input Amp(s)
Output Amp(s)
Rated Power (VA/Watts)
Frequency
No. of Phases
Class Type
Plug/Connector Type
Operation
AC Input Protection (Qty/type/rating)
Max Leakage Current (uA)
Weight
Known Contraindication
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation,
operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings may affect
your warranty.
Note: Your UPS incorporates overcurrent protection in both the L1 and L2 input conductors.
UPS Location Warnings
Relevant Symbols
Denotes that information in the manual should be reviewed before use.
Used to signal as a warning that a statement is particularly important and could pose a safety
risk.
Warning-Dangerous Voltage
Denotes general warning sign
Refer to Instruction Manual/Booklet
15-08-266-9333A2.indb 2
OMNIX350HG
230V
1.78
1.5
350VA, 225W
50/60 Hz
Single
Class I
Inlet C14 with dongle
Inlet C14 with dongle
Continuous
Input breaker (2 x 3A)
Input breaker (2 x 5A)
thermal
Less than 100uA
Less than 100uA
11.5 kg
None
2
SMX700HG
SMX1200XLHG
230V
4
2
700VA, 450W
1000VA, 750W
50/60 Hz
50/60 Hz
Single
Class I
Inlet C14 with dongle
Continuous
Continuous
Input breaker (2 x 6A)
thermal
Less than 100uA
19.1 kg
None
No sitting
No stepping on surface
No pushing
230V
5
3.3
Single
Class I
thermal
20.6 kg
None
9/9/2015 2:00:16 PM