Installation
1
Connect the rear panel connectors.
When installing the unit on a desk
p
Place the unit flat on the surface.
Notes
p p Install the unit in a stable location which will not be susceptible to shaking. If the unit is installed in a location which is
susceptible to shaking, this will cause the unit's images to shake in turn.
p p Take care not to allow the unit to fall or otherwise be damaged during installation.
p p When carrying the unit, do not hold it by its head.
p p Do not take hold of the camera head or rotate it. Doing so may cause malfunctioning.
p p Take care not to pull the connected cables. Doing so may cause the unit to fall and/or it may result in injury.
Ensure that the unit will not fall off.
AC adaptor cable
Video output cable
OK
NG
18 (E)