Original Accessories/Auxiliary Equipment; Operation - Parkside PNKP 105 B1 Traducción Del Manual De Instrucciones Original

Original accessories/auxiliary equipment

♦ Only use the accessories and additional equipment that are
specified in the operating instructions and compatible with the
appliance .

Operation

Preparing the surfaces to be glued:
■ Do not use flammable solvents to clean the surfaces to be glued .
■ The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C .
■ The area to be glued must be clean, dry and free of grease .
♦ Smooth surfaces should be roughened before gluing .
♦ Quick-cooling materials such as steel should be warmed a little
to facilitate adhesion .
1 . Fold out the stand
2 . Push a glue stick
3 . Allow the appliance heat up for about 5 minutes .
The appliance is now ready for use .
■ 48 │ GB │ MT
. Put down the appliance .
into the feeder shaft .
PNKP 105 B1