Rockford Fosgate RFX Serie Instalación Y Funcionamiento página 13

PRESET BUTTONS
Each Tuner mode—FM1, FM2, and AM—has 10 presets for a total of 30 presets.
NOTE: The following is for the panel of the source unit. See the end steps if using the optional
remote.
To Set a Preset Button (for buttons 1 to 6)
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 6) for five seconds and it will program that setting.
PUSH
MENU
To Set a Preset Button (for buttons 7 to 0)
3. Tune the Tuner to the station you wish to program.
4. First, press the T-ACC button, then press and hold preset button (7 to 0) for
five seconds and it will program that setting.
To Set a Preset Button (remote use)
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 0) for five seconds and it will
program that setting.
AUTO STORE
If you want the Tuner to select the 10 most powerful
stations in order of their signal strength and assign them
to Preset buttons 1 to 0, you can use Auto Store.
1. Press and the AS button and the Tuner will scan the
entire dial.
2. Auto Store will store radio stations independently
in the selected tuner bank (FM1/FM2/AM).
Available on International R.D.S. Models Only
AF/TP MODE
TP (Traffic Program) Mode will automatically switch to receive a Traffic Announcement regardless of
the current operating mode of the unit. EON TA are stations that do not have a TRAFFIC PROGRAM
but can provide information on other radio stations that do.
AF (Alternative Frequencies) Mode compares the signal level of the current station with the signal
level of other alternative frequencies on the same radio network (see PTY Mode). If the AF provides
a stronger signal than the current frequency, the radio will switch to the stronger AF.
Traffic Program Mode (TP)
1. Press the AF/TP button to engage TP Mode, and again to disengage TP Mode.
2. When TP is blinking, TP Mode is on and there is no TP DATA to receive.
3. The SEEK or AS function will stop only at radio stations providing TP or EON TA.
Alternative Frequencies Mode (AF)
1. Press and hold the AF/TP button for 1 second to engage AF Mode.
2. Press and hold AF/TP again for 1 second to disengage AF Mode.
ENTER SCAN
DIR
1
BAND
ROOT DIR SONG
RPT RDM T/-10
2 3 4
OOT MUTE
7
6
O
PERATION
T/+10 ROOT MUTE
7
5 6
RFX 9000
PUNCH
MUTE
7
Remote
0
AS
9
LO/DX
8
T-ACC
– T
UNER
8
T-ACC
OPEN
0
AS
9
LO/DX
8
T-ACC
1
13