Philips Satinelle Manual De Instrucciones página 7

to reach, speed • ("normal speed") is recommended.
• For larger areas and thicker hairs, speed • • ("extra
speed") is advisable.
- Stretch the skin with your free hand, to bring the hairs into
an upright position. This is especially important for areas
where the skin is sensitive and tender.
- Hold the Satinelle at right angles to the skin, with the
on/off switch facing you. Do not operate in a sloping
position! (Fig. 3)
- Move the Satinelle gently and with light pressure
against the direction of the growth of the hairs.
- To switch off the Satinelle, move the switch back to the
central position.
Cleaning
• For the best epilation results it is essential to clean the
tweezer discs after each use.
• Always switch off the Satinelle and remove the plug from
the mains outlet before cleaning.
• Never immerse the appliance in water.
• Do not use abrasive cleaning agents, scourers, alcohol,
acetone etc. for cleaning the plastic housing.
- Push the two ribbed areas inwards and pull the shield (C)
from the appliance (fig. 4).
Please note: Do not attempt to disassemble the tweezer
discs assembly from the appliance!
- Use the brush to clean the tweezer discs (B) (fig. 5).
- Replace the shield ("Click!") (fig. 6).
Note: The shield can be placed on the appliance in
only one position!
7