Medtronic MiniMed MMT-7512 Guia Del Usuario página 11

WARNING: Never point a loaded serter toward any body part where insertion is not desired. An
accidental button-push may cause the needle to inject the sensor in an undesired location, causing
minor injury.
10a 10b
10a. Hold the serter
steady against your
cleaned insertion
site, without
pushing the serter
too deep into your
skin.
Note: Failing to hold the serter securely flat against your body may allow the serter to spring back after
pressing the buttons, and result in improper insertion of the sensor.
Note: The arrow on the side of the serter aligns with the needle inside the
serter.
10c
10b-10c. Press and
release the
bump on both
buttons at the
same time,
while holding
the serter flat
against your
body.
10d
10d. Continue holding
the serter flat
against your
body to allow the
adhesive to stick to
your skin.
- 11 -
10e
10e. Slowly lift the serter
away from your
body, making sure
that the buttons are
not pressed.