Changing The Water Filter - Samsung RF24FSA Manual De Instrucciones

Cooling
- North American (US, Canada) Models Only ;
Off Mode
Cooling Off mode (also called Shop
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop floor. In Cooling Off mode, the
refrigerator's fan motor and lights work
normally, but the compressors do not run,
and the refrigerator and freezer do not get
cold. To start Cooling Off mode, touch
and hold the Energy Saver button and
the Freezer button for 5 seconds during
normal operation. The refrigerator chime
sounds and the temperature display
flashes OFF.
To cancel Cooling Off mode, touch and
hold the Energy Saver and the Freezer
buttons again for 5 seconds.
CHANGING THE WATER
FILTER
To reduce the risk of water damage
to your property DO NOT use generic
WARNING
brands of water filters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG is not legally responsible for any
damage, including, but not limited to,
property damage caused by water
leakage from the use of a generic
water filter. SAMSUNG Refrigerators
are designed to work ONLY WITH
SAMSUNG Water Filters.
The Filter light turns red to let you know when it is
time to change your water filter cartridge.
To give you time to get a new filter, the red light
comes on just before the capacity of the current
filter runs out. Changing the filter on time provides
you with the freshest, cleanest water from your
refrigerator.
To change the water filter, follow these steps:
1. Shut off the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
• To change the water filter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
18_ operating
DA68-02897A-12.indb 18
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
• When you pull the water filter, a little water
can leak from the opening. This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow,
empty the water
filter tray ( 3 ) and
dry around the filter
case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until
it locks.
• If you have trouble inserting the water
filter because of high water pressure,
shut off the water supply valve.
• The locked symbol should be lined up
with the indicator line.
5. Touch the "Alarm/hold
3 sec for Filter Reset"
button (
(Filter Reset)
(Red)
about 3 seconds to reset
the water filter. The color of
the indicator (
6. If you turned off the water supply, turn it back
on.
For a replacement water filter, you can visit
your local home Improvement center or
contact the Samsung Parts distributor.
To order more water filter cartridges,
contact your authorized Samsung dealer.
2
Be sure the replacement water filter has
the SAMSUNG logo on the box and on the
water filter.
1
Removing any residual matter inside
the water supply line after installing
the water filter.
1. Turn ON the main water
supply and supply water
from water supply line.
2. Run water through the
dispenser until the water
runs clear (approx. 6 to
2
3
4
) for
) changes from red to off.
2016. 3. 30. 2:28