Triton Blue Discovery 2048 Manual De Usuario página 27

d
ElEtE A stEp
Under the Chase menu, press <Delete> to enter the Delete menu; press a desired <Playback> button to delete a step.
s
tEp tiME
Under the Chase menu, press <Time> then press a desired <Playback> button to enter the Time Editing menu. Press
<Up> or <Down> to turn the pages; press a soft key to select the options for editing; roll <Wheel Value> to change the
values; Press <Enter> to confirm.
The time options include (see the figure on the next page):
• [Wait Fade In] – The wait time before an HTP channel fading in
• [Wait Fade Out] –The wait time before an HTP channel fading out
• [Fade In] –The fade in time of an HTP channel
• [Fade Out] – The fade out time of an HTP channel
• [LTP Slope] – The fading time of an LTP channel
• [LTP Wait] – The wait time before an LTP channel fading
• [Connect] – If close the connection, then, the scene running will be paused at this step until <Go+> or <Go-> is
pressed.
• [Simple Step] – The global time of using multi-step scene
• [Complex Step] – The special time for its own
i
ncludE stEps
Under the Chase editing menu, press a desired <Playback> button of the step, then, scene data will be imported.
g
lobAl tiME
1. Under the first level menu, press <Time>;
1. Then, press a desired scene. Press <Up> or <Down> to turn the pages; press a soft key to select the options for
editing; roll <Wheel Value> to change the values; Press <Enter> to confirm.
d
ElEtE A stEp
1. Under the first level menu, press <Delete>;
2. Press a desired <Playback> button twice to delete.
c
opy A scEnE
1. Under the first level menu, press a desired <Playback> button;
2. Press another <Playback> button. Then, the scene in the first button is copied into the second one
r
un chAsE
Raise a fader, the corresponding Chase on the current page will be output. In the starting menu, press a <Playback>
button to output and close after you release it.
User manual | Discovery 2048 Triton Blue | Rev. January.2016 | www.triton-blue.com
27