Triton Blue Discovery 2048 Manual De Usuario página 21

address code; Press <D> [Auto calculate Addr.] to automatically achieve a suitable address code..
5. Press a desired <Fixture> button to patch an intelligent fixture. You can patch a range of fixtures by holding
down the first and last Fixture buttons of the range, the same as for dimmers. Unlike dimmers, you cannot patch
more than one fixture onto a fixture button. If the fixture button is already used, the patch will fail. Use a different
fixture button or delete the fixture already on the fixture button if you don't want it any more.
C. View the patching
• Press <E> [Patch Information] to view the patching info.
E
dit
A. Changing the DMX address
You can re-patch a fixture to a different DMX address or a different DMX output line. All programming is kept.
• If not in the Patch menu, press <Patch> to enter.
• Press <C> [Re-patch Fixture].
• An address will be displayed at Line 2 on the screen for patching. Roll <Wheel Value> to change the ad-
dress.
• Once the address code is set, press a desired <Fixture> button to patch.
• Press <Enter> to confirm.
B. Deleting a patched fixture
• If not in the Patch menu, press <Patch> to enter.
• Press <Delete> to enter the Delete Patch menu.
• Press a <Fixture> button to select a desired fixture or roll <Wheel Value> to select the desired address of the
fixture, then, press <Enter> to confirm the deletion.
C. Patch Utilities
• Invert - Allows you to invert an attribute of a fixture, so when you set zero the output will be full. You cannot
invert some attributes.
» If not in the Patch menu, press <Patch> to enter.
» Press <D>[Patch Utilities]. Then, press <B>[Set Invert].
» Select fixture and select attribute, then, press <C> or <D> to modify.
• Set/Reset Instant mode – When the fades LTP (movement) channels between two memories, the LTP va-
lues normally change smoothly. You can set Instant mode to make the channel snap instantly to the new value.
» If not in the Patch menu, press <Patch> to enter.
» Press <D> [Patch Utilities]. Then, press <C> [Set Instant Mode].
» Select fixture and select attribute, then, press <C> or <D> to modify
• Swap pan and Tilt - If you have some fixtures mounted sideways, it can be useful to swap the pan and tilt
channels over.
» If not in the Patch menu, press <Patch> to enter.
» Press <D>[Patch Utilities]. Then, press <D> [Swop P/T].
» Press <Up> or <Down> to view the Pan/Tilt swop info. Press the soft key to modify
User manual | Discovery 2048 Triton Blue | Rev. January.2016 | www.triton-blue.com
21