Unit Installation - LG LW1019IVSM Manual De Uso

12 INSTALLATION
2
Fasten the curtain panels to the unit with 8
type A screws.
3
Cut the window sash seals to the proper
length. Peel off the backing and attach the
Foam-PE(Adhesive backed) to the
underside of the window sash and bottom
of window frame.
4
Open the window and mark center line
on the center of the inner sill.
Center Line
Inner Sill
Room Side
5
Install the L bracket behind the inner
window sill, with short side of bracket as
shown. Use the 2 Type A screws provided.
Inner Sill
Outer Sill
L Bracket
Foam-PE
(Adhesive backed)
Center Line
NOTE
● The bracket helps to hold unit securely in
place. Be sure to place bracket edge flush
against back of inner sill.

Unit Installation

CAUTION
● During the following step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
1
Set the air conditioner in the window so that
is centered. Place the air conditioner so that
front edge of the bottom guide is against the
back edge of the sill.
Bring the window down so that the front edge
of the upper guide is in front of the window.
Make sure that air conditioner is level or
tilting slightly to the outside.
Window Frame
Upper Guide
L Bracket
2
Extend the guide panels to fill the window
opening using 4 Type B screws to secure
them.
Seal
¼"
About
Bottom Guide