Insignia NS-H4005 Guia Del Usuario página 56

Symptom
The playback picture is
poor.
Your home theater
system does not start
playback.
The remote control does
not work correctly.
Camcorder image does
not appear on the TV
screen
54
Insignia NS-H4005 Home Theater System
Cause
The disc is dirty.
VCR video heads are
dirty.
The videotape is a rental
or was recorded on
another VCR.
No disc or videotape is
inserted.
An unplayable disc is
inserted.
The disc is placed upside
down.
The disc is not placed
within the guide.
The disc is dirty.
The remote control is not
pointed at the remote
sensor on your home
theater system.
The remote control is too
far from your home
theater system.
There is an obstacle
between the remote
control and the remote
control sensor.
The batteries in the
remote control are
exhausted.
Your home theater
system is in the wrong
mode.
The wrong video input
source is selected.
www.insignia-products.com
Solution
Clean the disc.
Clean the video heads.
Adjust the tracking.
Insert a disc or videotape.
The disc or videotape
indicator lights in the
display window.
Insert a playable disc.
(Check the disc type,
color system, and
regional code.)
Place the disc with the
label facing up.
Make sure that the disc is
placed correctly inside
the guide on the disc tray.
Clean the disc.
Point the remote control
at the remote sensor of
your home theater
system.
Operate the remote
control within 23 ft. (7 m).
Remove the obstacle.
Replace the batteries.
If you are playing a
videotape, press VCR.
If you are playing a disc,
press DVD/CD.
If the camcorder is
connected to the back
A/V jacks, select LINE 1.
If the camcorder is
connected to the front
A/V jacks, select LINE 2.