Insignia NS-H4005 Guia Del Usuario página 18

2 Plug the left and right audio connectors on the supplied audio
cable (A) into the left and right DVD/VCR AUDIO OUT L and R
jacks on the back of your home theater system, then plug the
connectors on the other end of the cable into the AUDIO IN L and
R jacks on the back of the TV.
Note
If you use this connection, set the TV's input source to
VIDEO.
To connect a TV with component or progressive scan jacks:
Note
The DVD player can play through the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT jack.
The VCR and radio can only play through the standard A/V
jacks.
1 Plug the connectors on the supplied component A/V cable (C) into
the COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y, Pb,
and Pr) jacks on the back of the home theater system, then plug
the connectors on the other end of the cable into the appropriate
jacks on the back of the TV.
2 Plug the left and right audio connectors on the supplied audio
cable (A) into the left and right DVD/VCR AUDIO OUT L and R
jacks on the back of your home theater system, then plug the
connectors on the other end of the cable into the AUDIO IN L and
R jacks on the back of the TV.
Note
If your television is a high-definition or "digital ready"
television, you can use your home theater system's
progressive scan output for the highest video resolution
possible.
If you are using a Progressive Scan connection, turn on
Progressive Scan in the on-screen display (OSD). For more
information, see "Using progressive scan" on page 44.
If your TV does not support the Progressive Scan format,
the picture will appear scrambled if you turn on Progressive
Scan.
16
Insignia NS-H4005 Home Theater System
www.insignia-products.com