Cleaning The Unit - Olivetti d-Copia 120D Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 315
4
Gently install the TD cartridge. To install the TD cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.10).
5
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The drum
replacement required (
(
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order, the
covers may be damaged.

CLEANING THE UNIT

Proper care is essential in order to get clean, sharp copies. Be sure to take a few
minutes to regularly clean the unit.
• Before cleaning, be sure to turn the power switch off and remove the
• Do not use thinner, benzene or other volatile cleaning agents. Doing
Cabinet
Wipe the cabinet with a soft, clean cloth.
Original table and the back side of the original cover/SPF
Stains on the glass, scanning window, cover or SPF roller will also be copied. Wipe
the glass, scanning window, cover and SPF roller with a soft, clean cloth. If
necessary, dampen the cloth with a glass cleaner.
Original table/scanning window
60
) indicator will light up.
power cord from the outlet.
so may cause deformation, discoloration, deterioration or malfunction.
Scanning window
) indicator will go out and the start
Original cover/SPF
SPF roller
Tabla de contenido
loading

Este manual también es adecuado para:

D-copia 150d

Tabla de contenido