How To Read This Manual; Symbols In This Manual; General Precautions; When Installing Or Moving - Toshiba e-STUDIO2802A Información De Seguridad

.

How to read this manual

Symbols in this manual

In this manual, some important items are described with the symbols shown below. Be sure to
read these items before using this equipment.
Other than the above, this manual also describes information that may be useful for the
operation of this equipment with the following signage:

General Precautions

When installing or moving

For the U.S.A. and Canada
Multifunctional Digital Systems require 120 V, 12 A, 50/60 Hz electric power.
For the EU
Multifunctional Digital Systems require 220 to 240 V AC, 8 A, 50/60 Hz electric power.
Except the U.S.A., Canada and the EU
Multifunctional Digital Systems require 220 to 240 V AC, 8 A, 50/60 Hz electric power.
Do not use a power supply with a voltage other than that specified.
Avoid multiple connections in the same outlet. This could cause a fire or give you an electric
shock. If you are considering increasing the number of outlets, contact an electrician.
Always connect this Multifunctional Digital Systems to an outlet with a ground connection to
avoid the danger of fire or electric shock in case of short-circuiting. Contact your service
representative for the details. Be sure to use a 3-conductor, grounded wall outlet.
In areas, except the U.S. and Canada, where a 2-pin plug is used, the Multifunctional Digital
Systems must be grounded for safety. Never ground it to a gas pipe, a water pipe, or any
other object not suitable for grounding.
Plug the power cord securely into the outlet. If it is not plugged in properly, it could heat up
and cause a fire or give you an electric shock.
12 (GB) Safety Information
Indicates a potentially hazardous situation which, if not avoided, could
result in death, serious injury, or serious damage, or fire in the equipment or
surrounding objects.
Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury, partial damage to the equipment or surrounding
objects, or loss of data.
Indicates information to which you should pay attention when operating the
equipment.
Describes handy information that is useful to know when operating the
equipment.
Pages describing items related to what you are currently doing. See these
pages as required.