PROXIMITY KEYS
5 proximity keys are included: yellow and red configuration keys; and 3 door opening
blue keys.
Important: The yellow and red keys are used to register new keys, keep
them in a safe place and do not lose them, they are irreplaceable.
How to open the door
Pass a door opening key near the entrance panel reader marked iACCESS. The
entrance panel will emit a Beep and the door will open.
Note: Do not move the key in front of the reader.
How to register new keys
To register new door opening keys, you need the yellow key.
1. Pass the yellow key through the reader. A short beep indicates setup
mode is activated.
2. Pass one by one all the keys you want to register, a beep confirms the
registration of each key.
3. When finished, pass the yellow key again, a long beep indicates setup
mode is disabled.
How to remove all keys
The system allows all door opening keys to be removed, you need the red key.
1. Pass the red key through the reader. A short beep indicates that erase
mode is activated
2. Pass the red key through the reader again. A long beep confirms that
all keys have been removed.
KIT erlea plus
ENG - 10