Seiko 8B92 Manual De Instrucciones página 32

Troubles
Even if the watch receives
Misalignment a radio wave successfully, it
of Date displays the incorrect date (the
time is correct).
Misalignment After resetting the
of the stopwatch, the stopwatch
stopwatch hands do not stop at the
hands 0-second position.
Time
Time zone cannot be set.
difference
The buttons or crown
cannot be activated
(operated).
Operation
Forget step in the middle of
the setting procedures.
The innersurface of the
Others
glass is clouded.
* For the solution of troubles other than the above, consult the retailer from whom the watch was
purchased.
62
8B92_E_42-66.indd 62-63
Possible causes
The preliminary position of the date is misaligned.
This happens when the date is out of preliminary position
as a result of external influences or system reset.
The stopwatch hands are out of the preliminary
position. This happens when the stopwatch hands
are out of the preliminary position as a result of
external influence or system reset.
The stopwatch hands are moving.
The stored energy is running short.
Date numeral in the date window or the day
hand is moving right after the various crown or
button operations for setting.
––––––––––––––––––––––––––––––––––
Moisture has entered the watch due to the
deterioration of the packing.
Solutions
Set the preliminary position of the date to "1" (1st).
Adjust the preliminary position of the stopwatch hands to "0."
Reset the stopwatch before setting the time zone.
Fully charge the watch so that the second hand may move at one-second intervals.
Wait with the watch untouched.
When the movement of the date numeral stops, the crown and buttons can be operated.
①When the crown is pulled out, push it back in.
②Leave the watch untouched for a while. The watch will resume its normal movement.
③Then start the setting procedure from the beginning.
Contact the retailer from whom the watch was purchased.
63
2016/04/27 15:55