Quick Start; Making Connections - Samson EXPEDITION EXPRESS+ El Manual Del Propietario

Quick Start

•
Set the Express+ power switch to the OFF position, and fully turn all of the LEVEL
controls counterclockwise to 0.
•
If an outlet is available, connect the included power adapter to the DC input of the
speaker, and plug it into an electrical outlet.
•
Connect your audio sources.
•
Set the Express+ power switch to the ON position.
• Turn the channel Volume controls up and set the input levels, following the steps below.

Making Connections

Microphone Input
•
Connect a microphone using a balanced XLR
microphone cable.
•
While speaking or singing at performance
level into the microphone, slowly raise the
channel MIC/LINE VOLUME control until you
have reached the desired level.
NOTE: If not using the Mic Input, turn the MIC/
LINE VOLUME control all the way down to keep
out any unwanted noise.
Aux Input
•
Connect a line level device using 1⁄8"
(3.5mm) cable.
•
Set the output volume of your audio device to
it's maximum setting.
•
While playing music from a line level audio
source, slowly raise the AUX/BLUETOOTH
VOLUME control until you have reached the
desired level.
8