Quick Start - Samson expedition escape Manual Del Propietário

Quick Start

Using a microphone
Set the Expedition Escape's power switch to the OFF position, and fully turn
•
the volumes controls counterclockwise to 0.
If an outlet is available, connect the included power cord to the AC INPUT
•
of the speaker, and plug it in.
Connect a microphone using a
•
Switch on the Expedition Escape power.
•
While speaking into the microphone, slowly raise the channel MIC until you
•
have reached the desired level.
NOTE: If not using the MIC input, turn the volume control all the way down to keep
out any unwanted noise.
Pairing with a Bluetooth® device
• Turn all MASTER VOLUME control all
down counterclockwise to 0.
• With the Expedition Escape and your
Bluetooth device powered on; press the
PAIR button on the rear panel of the
Expedition Escape speaker to make the
speaker discoverable. The Bluetooth
indicator will slowly flash green.
• In the settings of your Bluetooth
device, set it to "discover" available
devices.
• From the Bluetooth device list, select
the "Samson Escape" device.
• If your device asks for a passkey, enter digits 0000 (four zeros) and press
OK. Some devices may also ask you to accept the connection.
• As the Expedition Escape is connecting to your device, the Bluetooth
indicator will quickly flash green.
• The Expedition Escape speaker indicates that pairing is complete when the
indicator turns steady green. You can now stream audio from your device to
the Expedition Escape speakers.
• With the volume control on your Bluetooth device turned up, play some
music, and slowly raise the Expedition Escape channel MASTER VOL control
until you have reached the desired level.
8
⁄ " cable to the MIC INPUT.
1
4