Interference
Noise interference on your Parent Unit
• Your Baby and Parent Units may be too close. Move them farther apart.
• Make sure there is at least 1 to 2m (3 to 6ft) between the 2 units to avoid audio
feedback.
• lf the Baby Unit is too far away it may be out of range, so move the Baby Unit
closer to the Parent Unit.
• Make sure the Baby and Parent Units are not near other electrical equipment,
such as a television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
®
Bluetooth
systems, or microwave ovens, may cause interference with this
product, so keep the Baby Monitor away at least 1.5m (5ft) from these types
of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.
Noise interference on your device
To avoid background noise or echoes, ensure that there is enough distance
between your device and the Wi-Fi
Use of other 2.4 GHz products, such as Bluetooth
ovens, may cause interference with this product. Keep the Wi-Fi
at least 1m away from these types of products, or turn them off if they appear to
be causing interference.
Lost connection
®
Check your Wi-Fi
®
Wi-Fi
Camera Unit is switched ON. Wait a few minutes to make the connection
®
with the Wi-Fi
system.
58
®
settings. If necessary reconnect your Wi-Fi
Camera Unit.
®
systems or microwave
®
routers),
®
Camera Unit
®
. Ensure the
Help