Moulinex soup & co Manual De Instrucciones página 16

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
PROBLEMS
The appliance does not work.
Excessive vibrations
Leak from the lid
The blades are not rotating
freely.
Display shows "secu".
Display shows "secu" + red
light flashes.
Displays shows "Err" + red
light flashes.
Display shows "ntc" + red
light flashes.
Your appliance still does not work?
Contact an approved Moulinex service centre (see list in service booklet).
RECYCLING
• Disposal of the appliance and its packaging materials
The packaging is comprised exclusively of materials that present no danger for the environment and which
may therefore be disposed of in accordance with the recycling measures in force in your area.
For disposing of the device itself, please contact the appropriate service of your local authority.
• End of life electrical and electronic products:
Think of the environment!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
CAUSES
The plug is not connected.
The bowl or lid are not correctly
positioned or locked.
The appliance has not been placed
on a flat surface; the appliance is not
stable.
Volume of ingredients is too high.
Volume of ingredients is too high.
The lid is not correctly positioned or
locked.
The gasket is not present.
The gasket is cut, damaged.
Pieces of food are too large or too
hard.
Motor overload caused by a very
high quantity of ingredients or
pieces that are too hard or too large.
The bowl is empty, almost empty or
the preparation is not liquid enough.
The heating element is not working.
The temperature sensor is not
working.
14
SOLUTIONS
Plug your appliance into a socket.
Check that the bowl or lid are
correctly positioned and locked as
shown in the diagrams in the leaflet.
Place the appliance on a flat surface.
Reduce the quantity of ingredients
processed.
Reduce the quantity of ingredients
processed.
Lock the lid properly on the bowl.
Position the gasket on the gasket
retainer and clip the assembly onto
the lid.
Replace the gasket, contact
an approved Moulinex service centre.
Reduce the size or quantity of
ingredients processed.
Add some liquid.
Allow the motor to cool down
and reduce the quantity of
ingredients in the bowl.
Add some liquid up to the minimum
level of the bowl (see Fig. 7).
Contact an approved Moulinex
service centre.
Contact an approved Moulinex
service centre.