Gima 28092 Guía De Uso página 24

Network frequency
magnetic field
EN 61000-4-8
Note: U T is the value of the supply voltage
Guide and declaration of the manufacturer – Electromagnetic Immunity
The Corsia aerosol can be used in the following electromagnetic environment. The Cus-
tomer and/or the user of the Corsia aerosol shall make sure that the appliance is used in
such environment.
Immunity Level set out by
test EN 60601-1-2
Conducted 3Vrms 150kHz
immunities to 80MHz
EN 61000-4-6 (for non-life-
supporting
appliances)
Radiated 10 V/m 80MHz
immunity to 2.7GHz
EN 61000-4-3 (for non-life-equip-
ment appliances)
Note 1: At 80 MHz and 800 MHz the highest frequency range applies.
Note 2: These guidelines could not apply to all conditions. The electromagnetic propaga-
tion is affected by the absorption and reflection of premises, objects and individuals.
ENGLISH
30 A/m
Level of
conformity
V =
1
3 V rms
E =
1
10 V / m
The appliance The power supply should be
does not alter that of a typical commercial
its status premise or hospital.
Electromagnetic Environment -
Guide
Portable and mobile RF communication
devices should be used no closer than
the separation distance from any part of
the Corsia device, including cables, cal-
culated from the equation applicable to
the frequency of the transmitter.
Recommended separation distanc-
es
d= [ 3.5 / V ] √P
1
d= [ 12 / E ] √P
1
d= [ 23 / E ] √P
1
P is the maximum rated output power
of the transmitter in Watt (W) according
to the manufacturer of the transmitter
and d is the recommended separation
distance calculated in meters (m).
The field strengths from fixed RF trans-
mitters, as established in an electro-
magnetic survey of the site
less than the level of conformity of each
frequency range
It is possible to check the
interference close to the
appliances labelled with
the following symbol:
80MHz to 800MHz
800MHz to 2,7GHz
, could be
a
.
b
24