Troubleshooting - Gima 28010 Guía De Uso

11
9. MAINTENANCE
After every treatment, please use neutral detergent to clear the dust, stains on leather or the plastic cover. This is to prevent
premature aging of the leather and plastic cover.
The moving parts should be lubricated with gease periodically (at least anually)
10. CIRCUIT SYSTEM CONNECTION DIAGRAM
AC 100~120V, 50Hz/60Hz OR AC 220~240V, 50Hz/60Hz
Power
Hand controller
Foot controller

11. TROUBLESHOOTING

Phenomenon
Can't go up or down normally
Abnormal sound
Please check and verify products specifications before use and this manual is only used for reference. The product specifica-
tions will be subject to change or update without further notice.
ENGLISH
Three control
program controller
Reason
1.The power cord is unconnected or not plugged
well
2. Poor quality of the manual controller
3. Poor quality of the foot control switch
4. Poor quality of the controller box
5. Rupture of motor tail
6. Motor detonation
1. The rotating parts lack of lubricating oil
2, Rotating position (such as hinge, P, O, M sets)
Lack of lubricating oil
3. Motor quality problems
Back angle motor
Whole bed lifting motor
Seat cushion angle
motor
Heating system
(optional)
Solution
1. Connect the power cord or plug it well
2. Replace the manual control panel
3. If problem is still not solved after replacing the
manual controller or foot control switch, please
contact maintenance center or supplier to
clear the trouble.
1. Add lubricating oil
2. Add lubricating oil
3. Replace the motor