Replacing The Rechargeable Battery Pack - Festo Robotino 4.0 Instrucciones De Utilizacion

®
Robotino 4.0 Mobile Robot System

11 Replacing the rechargeable battery pack

Proceed as follows to change the rechargeable battery pack of Robotino
– Battery pack 1 and 2: Press the mechanical release button on the battery pack (green button on the
side) and slowly pull out the battery packs.
– Battery pack 3 and 4: Remove the control unit first and then remove the battery holder. Press the
mechanical release button on the battery pack (green button on the side) and slowly pull out the
battery packs.
Note
You can change the battery packs during operation. As a prerequisite, Robotino
least 2 battery packs. At least one battery pack must remain connected to Robotino
batteries can be replaced during operation.
Briefly press the power button (< 1 second) to enable battery replacement. Pressing the power
button ends the program currently running on the Robotino
At least one charged battery pack is required to operate the Robotino
52
® 4.0.
® 4.0 must have at
®
® 4.0. Replace the battery packs.
® 4.0.
© Festo Didactic 8101524
4.0 so that the