Making Bags From Rolls - Bartscher 400M Manual De Instrucciones

STOP/CANCEL key – 2C
•
To stop the machine at any moment, press the "STOP/CANCEL" button (2C) Fig. A.
Unlock the lid by turning one of the two knobs (7) of the "Lock & Unlock System"
device.

5.5.4 Making bags from rolls

Insert a roll of suitable film in the roll holder (15) of the device.
Use only rolls for vacuum packing (with ribbed or embossed side).
Select the appropriate size for the bag in which the food will be preserved.
Make sure that the bag is at least 8 cm longer than the food being preserved. Every
new vacuum packaging reduces the bag by 2 cm.
a) Lift the lid and pull the two corners of the roll to the right length, (Fig. B1) and then
close the lid. Press the cutting blade and pull the bag from the left or from the right
(Fig. B2). A straight cut can be obtained. Furthermore, an open side of the bag can be
sealed as follows:
b) Bring one of the open ends of the bag with the
smooth side on the sealing bar (11) (Fig. C).
ATTENTION!
The bag must not
chamber
(10) or on the gasket (9), but must reach
the end of the external part of the gasket, as shown
in the figure.
- 50 -
protrude into the vacuum