Care & Cleaning
Setting the Controls to Self-Clean Oven
1. Close the oven door and move door lock lever right to the locked position.
2. Press Clean pad.
•
Clean indicator on the Clean pad will flash.
•
3:00 will light in display indicating three hours of cleaning time.
•
If door is not closed or locked, "dr" will appear in display.
3. Press ▲ or ▼ pad to change clean time, if desired.
•
Select 2 hours for light soil up to 4 hours for heavy soil.
4. IF YOU WISH TO DELAY THE START OF CLEANING (if not, skip to #5):
a. Press Stop Time pad.
b. Press ▲ pad to select the time of day you wish the oven to turn off.
c. Press Clock pad and time of day will reappear in display.
d. Press Stop Time pad to recall the time you set.
5. When the oven turns on:
•
The Oven On indicator will light and Lock indicator will light when oven heats to 400°F.
•
Door cannot be opened when Lock indicator is lit.
6. About one hour after the clean cycle ends, the Lock indicator will turn off. The
oven door can be opened. Move door lock lever to the left to unlock.
7. Wipe out the oven with a damp cloth to remove powdery ash. If soil remains it
indicates the cycle was not long enough.
TO CANCEL CLEAN CYCLE:
1. Press Cancel pad.
2. If Lock indicator is NOT lit, unlock and open oven door. If Lock indicator is lit,
allow oven to cool about one hour then unlock and open oven door.
13
, cont.
Self
Clean
Stop
then
Time
Cancel
then
WHEN LIGHT
TURNS OFF,
OPEN DOOR.