Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
Mandrel No. 53089 is used with the felt polishing tip and wheels. Thread the tip on to the
screw carefully. The felt tip must thread down straight on the screw Mandrel, and be turned all
the way to the collar.
If
Mandrel No. 25028 has a small screw at its tip, and is used with emery cutting wheels and
sanding discs. Higher speeds, usually maximum,
are best for most work, including cutting
steel, which is shown here.
To replace a band on the drum sander,
loosen the screw without
removing
it to contract the
drum, then slide the old band off. Slide the new sanding band on and then expand the drum by
tightening
the screw once again.
Before
each
use,
check
to make
certain
that
all components
are
assembled
to accessory
shank
and that
the
drum
is sufficiently
expanded
to secure
the band during use. If sanding
band is loose on the drum
during
operation it may "fly" off and strike you or bystanders.
25
Tabla de contenido
