Using The Ac Adapter - Omron micro Air NE-U22V Manual De Instrucciones

The device is designed not to draw power from the batteries when the AC Adapter is used. The AC
Adapter is not a battery charger.
WARNING
Use only the AC adapter designed by Omron for this device. Use of any other
AC adapter may damage the device.
To connect the AC Adapter to the Main Unit
(1) Place the Main Unit on the AC Adapter
Connection Stand as shown in the
illustration below.
NOTE:
It will click and lock to the stand.
(2) Insert the AC Adapter Power Plug into
a 120V electrical outlet.
WARNING
Do not plug or unplug the power cord into the electrical outlet with wet hands.
CAUTION
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
CAUTION
Do not use extension cords. Plug the power cord directly into the electrical outlet.
CAUTION
Unplug the power cord from the electrical outlet before cleaning the device.
To remove the AC Adapter from the Main Unit
(1) Disconnect the AC Adapter Power Plug from the electrical outlet.
(2) Push on both sides of the Connection Stand to unlock the Main Unit.
(3) Remove the Main Unit
CAUTION
Unplug the power cord from the electrical
outlet after using the device.

USING THE AC ADAPTER

(1)
Connection is completed.
12
(2)
(3) Remove
(1) Unplug
(2) Push both ends