Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating Manual
6.2.2 Modbus Communication Protocol
ZIGOR SOLAR XTR3 team enables communication via Modbus RTU, ASCII and TCP.
The selection of the desired protocol can be done in the inverter´s display.
ZIGOR SOLAR XTR3´s communication card has a RJ45 Ethernet input, through which we can
communicate the inverter to a computer using Modbus TCP and SNMP.
The communication card has two RJ11 jacks for communicating with Modbus RTU and ASCII. With
these 2 pins we can make a daisy chain configuration.
The polarization of the RJ11 is shown below in the following table:
For more information on the communication settings and maps Modbus and / or the MIB for SNMP
communications refer to our catalog.
© ZIGOR
PIN
Polarity
number
2
BUS
3
GND BUS M
4
BUS
+
-
ZIGOR SOLAR XTR3
37
Capítulos
Tabla de contenido
