Connection; Ac Supply Connection - ZIGOR SOLAR XTR3 Manual De Operación

Operating Manual ZIGOR SOLAR XTR3
Fig. 3-4 ZIGOR SOLAR XTR3 support plate
Step 2. Drill four holes marked on the wall. Insert the four snap bushings, now insert the screw and
tighten them.
Step 3. Now put the PV Inverter on to the plate. Tight the below screw to ensure the union between the
inverter and mounting bracket
Fig. 3-5 ZIGOR SOLAR XTR3 wall mount
Step 4. Ensure that the PV Inverter is secured firmly to the plate.
Fig. 3-6 ZIGOR SOLAR XTR3 wall mount detail
3.4 Connectio n

3.4.1 AC Supply Connection

In order to connect the AC cable, proceed as follows:
Step 1. Measure the grid voltage and frequency.
* The voltage and frequency of the grid may vary from one country to another.
Step 2. Before wiring the ZIGOR SOLAR XTR3 Inverter, ensure that the primary switch box circuit
breaker is in the OFF position. Place the aforementioned circuit breaker in the ON position only when all
the wiring has been completed according to instructions.
Step 3. Find the recommended AC-output cable size:
10 © ZIGOR