Nameplate; Tools - Grundfos Intertek MAGNA1 Installation And Operating Instructions

3.8 Nameplate

The pump nameplate provides the following information:
TYPE 2
BOITIER DE TYPE 2
THERMALLY PROTECTED
Nonsubmersible Pump
RISK OF ELECTRIC SHOCK. DE-ENERGIZE EQUIPMENT BEFORE REMOVAL OF COVER & SERVICING. FOR SUPPLY
CONNECTION USE COPPER WIRE SUITABLE FOR 90 °C OR EQUIVALENT. THIS PUMP HAS NOT BEEN INVESTIGATED FOR USE
IN SWIMMING POOL OR MARINE AREAS. TO REDUCE THE RISK OF ELECTRIC SHOCK, SEE INSTRUCTION MANUAL FOR
PROPER INSTALLATION; ACCEPTABLE FOR INDOOR USE ONLY.
RISQUE DE CHOC ELECTRIQUE. HORS DES EQUIPEMENT AVANT ENLEVEMENT DE LA COUVERTURE ET D'ENTRENTIEN. POUR
LE RECCORDEMENT D'ALIMENTATION, EMPLOYEZ DES FILS QUI RESISTENT AU MOINS A 90 °C UTILISEZ UNIQUEMENT DES
CONDUCTEURS DE CUIVRE. POUR RE'DUIRE LES RISQUES DE CHOC E'LECTRIQUE, CONSULTES LE MANUEL D'INSTRUCTIONS
Contains FCC ID: OG3-RADIOM01-2G4 POUR UNE INSTALLATION CORRECTE. EMPLOYER UNIQUEMENT A L'INTERIEUR.
Example of nameplate
Fig. 7
Pos. Description
1 Product name
2 Model
3 Production code (year and week)
4 Serial number
5 Product number
6 Enclosure type
7 Energy Efficiency Index (EEI)
8 Part (according to EEI)
9 TF-class
10 Minimum current [A]
11 Maximum current [A]
12 Minimum power [W]
13 Maximum power [W] 14 Maximum pressure
15 Voltage [V] and frequency [Hz]
16 QR (Quick Response) code
17 Approvals (nameplate)
18 Assembled in USA
8
PSI
For use with maximum 230° F water

3.9 Tools

1.2 x 8.0 0.6 x 3.5
1 2
5 6
Recommended tools
Fig. 8
Pos. Tool
1 Screwdriver, straight slot
2 Screwdriver, straight slot
3 Screwdriver, torx bit
4 Hexagon key
5 Open-end wrench
6 Wire cutter
7 Pipe wrench
TX20 5.0
3 4
7
Size
1.2 x 8.0 mm
0.6 x 3.5 mm
TX20
5.0 mm
Depending on size