Mounting Options; Electrical Assembly - Poolmaid M5C Manual De Instruccion

and follow the instructions
to glue the pieces
together.
Do this one at a time
exactly as they were fitted
together.
To speed up drying and
to prevent the clear cell
housing (9) from turning
milky, do not fit the
electrode holder (6) until
the glue has dried
(NB: only PVC pipe and
fittings can be glued)
STEP 5
a. After the glue has dried,
fit the electrode holder (6)
with O-ring seal in place
and hand-tighten the ring
nut ().
Do not over-tighten (check
for leaks).
a. Remove the plastic bag
from the outlet.
b. Turn multi-port valve to
filter.
c. Start the pump and check
for leaks.

4. Electrical Assembly

* It is recommended that
a registered electrician
CONNECTS the transformer and

Mounting options

Pipe
Clip
Mounting bracket
Pipe Clip
Back plate
of power
supply
controller
50mm
or  inch
PVC pipe
9.