Programming; Password; Creating Passwords; Technical Service - Pentair Water SFE-EV Manual De Uso Y Mantenimiento

S F E - E V

5 PROGRAMMING

The SFE-EV features 2 different programming levels, 1 for the user, called the basic menu, where the user can
visualize and modify the most basic parameters of the system, and an advanced menu, designed for installers
and OEM, where all parameters can be displayed and programmed.
To access the basic menu or the advanced menu, a password is required.

5.1 Password

Access to controller operating parameters requires input of a 4-digit code.
E
Different access profiles are set:
N
*End user  acces to the basic menu only
G
*Technical service  access to both basic and advance menu
L
*Manufacturer (Pentair Water)  full access
I
S
H
5.1.1

Creating passwords

End user
Enter the basic menu by pressing the
used for the first time, the default password is 0000).
Press the
While the message End is displayed, press the
Enter the new password and press the

Technical service

Go to the advanced menu by pressing the
the controller is being used for the first time, the default password is 1111).
Press the
While the message End is displayed, press the
Enter the new password and press the
button until the display shows the message End.
button until the display shows the message End.
button once only and enter the password (if the controller is being
button once only.
key, the password has been changed.
and buttons simultaneously and enter the password (if
button once only.
key, the password has been changed.
46