Setup - RPB GX4 08-400 Manual Del Usuario

SETUP

BEFORE YOU USE YOUR GX4
Unpack the unit from the shipping carton
and remove the shrink wrap from the sensor
cartridge. Read all instructions and warnings
that are included with the unit. Dispose of the
removed packaging responsibly making sure
there is nothing important left inside.
REGISTRATION:
Go to: http://go.myrpb.com/GX4-reg to
register your GX4 and be notified of software
updates and important product information.
UPDATES
The GX4 firmware should be updated
regularly to ensure you have access to the
latest features and maintain compatibility
with the latest cartridges. Visit http://
go.myrpb.com/GX4-Update for information
on the latest software and how to upgrade
your unit.
SENSOR CHECK:
Checks should be performed when a new
cartridge is installed and monthly thereafter.
This will insure the cartridge is within
calibration and providing adequate protection.
Follow the Sensor Check instructions on page
17 to check the calibration of the cartridges.
If the cartridge is no longer within calibration,
follow the instructions for removing it and
replace it with a new cartridge.
LOCATION
Place the GX4 in a place that:
 The alarm can be heard

Is protected from water and impact
See mounting instructions on pg. 8.
5