RPB GX4 08-400 Manual Del Usuario página 10

GX4 GAS MONITOR
SETUP
CONTINUED
CONNECT THE EXTERNAL ALARM
FIGURE 4.1
If using an external alarm device, connect
the plug into the auxiliary outlet. The use of
an external alarm is recommended when the
GX4 cannot be seen or heard by the operator.
The external alarm should be located near
the work area to alert the operators of the
status.
Alternatively, the auxiliary can control a shut
off valve, or other safety device.
10
FIGURE 4.2
1. Brown - 12V DC
2. Blue - Alarm Out
3. Black - Ground
To configure your own external device,
use the bare end AUX cable (08-434). It is
recommended to use a qualified electrician
when wiring to ensure you do not damage the
electrodes.

Incorrectly wiring your auxiliary can
permanently damage your unit.

Always use a qualified electrician.

Damage to the auxiliary is not covered
under the manufacturer's warranty.
4. White - Alert Out
5. Green - OK Out