Speck pumpen BADU Eco Touch-pro Ficha Técnica página 19

Setting the priming parameters
The motor has to be stopped ("0" button) to
programme the priming time. Then press the
"SET" button again for at least 3 seconds until
the speed display in the display begins to flash.
Now the speed can be set with which the motor
is to start up during the priming time. The
speed can be changed with the buttons "▼▲"
and saved with "OK". After the priming speed
has bee set, the length of the priming time can
be specified. The priming time can be set
between 0 (= Off) and 10 minutes.
Resetting
The motor can be reset to the state of delivery
by pressing the "SET" button for at least
15 seconds. The motor stops and the three
LEDs of the fixed speeds light up.
12/2012 VG 766.2150.069 19